Laddningsregulator för solpaneler, dubbel, 16 A
Ansluts mellan en 12 volts solpanel och 1 eller 2 ackumulatorer för att förhindra överladdning
Hög laddningsförmåga: max 2 x 8 A eller 1 x 16 A
Inspänning: Solpanel 15...30 V tomgångsspänning
Nominell spänning: 12 VDC
Max laddningsström: 16 A totalt (2 batterier på 8 A max eller ett batteri på 16 A max anslutet parallellt till båda utgångarna)
Anslutningar för 1 eller 2 st 12 V-batterier
En säkring F16 A krävs (ingår ej)
Skyddad mot backström (ingen ytterligare diod behövs)
Dimensioner: ca 87 x 60 x 33 mm (inkl botten- och fästplatta)
Tekniska data |
Input voltage | solar panels 15 - 30 V/DC open circuit voltage, 12 V/DC rated voltage |
Max. charging current | total 16 A (2 batteries of max. 8 A each or 1 battery connected in parallel at both outputs up to 16 A) |
Connections | 1 or 2 batteries 12 V. If only one battery is connected then both outputs (1 + 2) in parallel (simultaneously) applied to the battery |
Displays | one display per battery "battery is charging", 1 display: "all batteries charged". |
Cooling | In case of currents > 4 A the module has to be screwed with the metal bottom on a heat sink with a surface of > 300 sq. cm. |
Fuse | A pre-fuse F16 A is necessary (not included) |
Switch-on voltage | battery approx. < 12,9 V/DC (± 5%) |
Switch-off voltage | "battery charged" ca. 14,2 V/DC (± 5%) |
Own current consumption (is taken from the battery) | < 2 mA |
Reverse current-proof (no additional diode required) |
Dimensions | ca. 87 x 60 x 33 mm (with mounting bottom) |
Read more